Plug-and-play Easy Installation

How to mount or hang your sign?

Welcome to your new LED neon sign! To ensure a safe and effective installation, please follow these step-by-step instructions. Before beginning, remember to handle your sign with care to avoid any damage.

1. Wall Mounting Kit

Tools needed:

  • Drill
  • Screwdriver
  • Level
  • Pencil (for marking drill positions)
  • Measuring tape

Safety precautions

  • Ensure power is off during installation
  • Avoid touching the LED part of the sign directly
  • Wear safety gloves if necessary

Step 1

Unbox your sign

  • Carefully remove the sign from its packaging.
  • Check for any damage that might have occurred during shipping.

Step 2

Find the right location

  • Decide where you want to install the sign. Consider visibility and proximity to a power source.
  • Ensure the surface is clean, dry, and flat.

Step 3

Marking and Drilling

  • Hold the sign against the wall in the desired position.
  • Mark the wall through the sign's mounting holes.
  • Drill holes where you marked.

Step 4

Inserting wall plugs into the drilled holes

  • Fix and screw stand-offs onto the wall

Step 5

Putting cushions on both sides of the backboard

Placing the silicon rings on both sides of the board through the screws

Step 6

Fixing the screw caps

  • Fix and tighten the screw caps

Step 7

Powering the sign

  • Carefully connect the sign to the dimmer and the power supply
  • Ensure all connections are secure and not strained

2. Suspension Kit

Safety precautions

  • Ensure power is off during installation
  • Avoid touching the LED part of the sign directly
  • Wear safety gloves if necessary

Step 1

Unbox your sign

  • Carefully remove the sign from its packaging.
  • Check for any damage that might have occurred during shipping.

Step 2

Measure and Mark

  • Determine where the sign will hang. Measure the distance between the suspension points on the sign and mark these points on the ceiling.

Step 3

Install Hooks

  • Screw the provided hooks or ceiling anchors into the marked points. Ensure they're firmly fixed and can bear the sign's weight.

Step 4

Attach Cables

  • Connect the suspension cables to the sign, adjusting their length as needed to achieve the desired hanging height.

Step 5

Hang the Sign

Carefully lift the sign and hook the suspension cables onto the ceiling hooks. Double-check the balance and security of the sign.

Step 6

Powering the sign

  • Carefully connect the sign to the dimmer and the power supply
  • Ensure all connections are secure and not strained

Final Adjustments

  • For both methods, it's crucial to make final adjustments to ensure the sign is level, securely attached, and positioned as desired. Once installed, connect your sign to a power source and enjoy the vibrant glow.
  • Both the Wall Mounting Kit and Suspension Kit offer distinct advantages, allowing for flexibility in how and where you display your LED neon sign. Choose the method that best fits your space and aesthetic preference.

Maintenance and Troubleshooting

Maintenance:

  • Regularly dust the sign with a soft, dry cloth.
  • If needed, gently clean with a damp cloth and mild soap. Avoid harsh chemicals.

Troubleshooting:

  • If the sign does not light up, check the power supply and connections.
  • In case of flickering or partial illumination, ensure all connections are tight and secure.